|
Moisture Meters Reviewss for Solid/Powder, Slurries, Foliages
Handheld
sMS1204 series Powder Moisture Teller
[Introduction] [Datasheet]
 |
H-BD5sMS1204
Moisture Meter for Solid Powder
RF attenuation.
Special designed for powder material application. Suitable to test
moisture of Ceramics and earth, Chemicals, Cements, Coal,
Corn&Grain, Cotton,
Fermentation Products, Fertilizer, Foods processing Particles,
Glass materials, Mineral powder, particle Polymers, Pharmaceuticals,
particle Resins, particle Dyes, Sands,Soil,Solid lubricants, and other powder chemicals.
|
|
Type |
Application
Samples |
Range |
LDL |
Accuracy |
Sample
temperature |
| H-MS1204poke |
Dia...
0.5 to 10mm.Powder, grain, particle (meshes to f 10mm), colloid,
thick fluid, truss etc. |
0-100% |
0.1 |
±
1.0%FS |
0-100℃ |
| H-MS1204paw |
Dia..
0.5to 6mm.Powder, grain, particle, colloid, thick fluid, truss,
lump, block, chunk, etc. |
0-100% |
0.1 |
±
1.0%FS |
0-100℃ |
| H-MS1204Spoon |
Dia..
1-4mm Grain, Particle with a sampling spoon |
0-40% |
0.1 |
±
1.0%FS |
0-100℃ |
| H-MS1204Disc |
powder
and lose samples with density compensation by press |
0-40% |
0.1 |
±
1.0%FS |
0-100℃ |
| H-MS1204F |
Wood,
plate materials. Surface detect to 1cm deep |
0-40% |
0.1 |
±
0.5%FS |
0-100℃ |
| H-MS1204N |
Needle
alike, used to hard solids. to test when inserted, for soil etc. |
0-40% |
0.1 |
±
0.5%FS |
0-100℃ |
H-MS2100
Moisture&water activity Analyzer [Introduction] [Datasheet]
 |
H-MS2100Wa Water activity hygrometer
water
activity meters, The
active part of moisture content and, therefore, water activity,
provide better information than the total moisture content regarding
the micro-biological, chemical and enzymatic stability of perishable
products such as foods and seeds. For similar reasons, water activity
is equally relevant in the pharmaceutical industry where it provides
useful information regarding the cohesion of tablets and pills, or the
adherence of coatings. Water activity can be directly compared with
the relative humidity of the ambient air to prevent dimensional
changes in a product (paper, photographic film), to prevent
hygroscopic powders (powdered sugar, salt) from caking or turning into
a solid block, etc
Water activity can be used with some products
(mostly synthetic products) as a means of indirectly measuring the
total moisture content. This requires developing sorption isotherms to
this purpose. Sorption isotherms are graphs that provide the
relationship between water activity and moisture content at constant
temperature. For most natural products, repeatable sorption isotherms
cannot be reliably developed and water activity should be regarded as
separate from moisture content.
Series accessories completes
H-MS2100Wa of versatile utility to test gas, liquids,
and solids with one analyzer.
- Specifications
- Aw Range: 0.03-1.00
- Moisture Range:100ppm to 100%
- Accuracy: 0.015Aw (<+/-0.3°C, at
room temperature )
- Repeatability:< 0.005 Aw (<0.1°C,
at room temperature)
- Temperature: -20 to 85°C; -50 to
200°C
- Instrument environ: -10 to 60°C； 0-99%RH
- Battery supply
- 3 mode
to test:
- SMART:
accelerated water activity measurement with automatic end of
measurement.
- NORMAL:
conventional water activity measurement with automatic
detection of equilibrium and automatic end of measurement
- STANDARD:
water activity and temperature measurement, limited to just
indicating the values and the trend of the values
- Test time: 2~5 min Typical at Smart:
|
H-MS4810DRS-NIR
Moisture Analyzer [Introduction]
[Datasheet]
 |
High resolution and selective moisture
analyzer, both for solids and liquids
Features
- Instant Measurement
- Non-Contact
- Non-Destructive
- Versatile usage
Application
- Chemicals,
Ink
- Pulp/Paper
- Pharmaceuticals
- Food, Beverages and Dairy
- Agriculture Grain, soil, woods,
fruits, Greenstuffs
-
Cement
and other materials
-
Cosmetics
and Beauty Products
- Lubricant Oils, machine oils, fuel
oils
- Plastics, polymers
|
sMS2100
Moisture&water activity
Transducer [Introduction] [Datasheet]
[User
Applications Data Form]
 |
On-line Applications
-
Process moisture measurement for solid powder, block
materials
-
Specially designed for
moisture measurement of irregular shaped materials, such as tobacco, foliage, cotton, and any mixture of powder, granular, grain state of particles.
-
Drying, desiccation, evaporation, torrefaction, xeransis process monitoring
-
Chemical process measurement
-
Industrial controls
Specifications
- Aw Range: 0.015-1.000
- Moisture Range:100ppm to 100%
- Accuracy: 0.015Aw (<+/-0.3°C, at
room temperature )
- Repeatability:< 0.003 Aw (<0.1°C,
at room temperature)
- Response:<10s
- Temperature: -20 to 85°C; -50 to
200°C
- Instrument environ: -10 to 60°C；
0-99%RH
|
sMS1204 series Powder Moisture Transducer
[Introduction] [Datasheet] [User
Applications Data Form]
 |
- On-line
Moisture Transducer
- T00-BD5xMD+sMS1204Dp
- RF attenuation.
- Range:0.1-50%;
- Repeatability:<+/-0.1%;
- Response
time:<100ms;
- Sample
temperature: <85° C
|
| |
- On-line
Moisture Transducer
- T00-BD5xMD+sMS1204Moon
- RF attenuation.
- Range:0.01-30%;
- Repeatability:<+/-0.01%;
- Response
time:<100ms;
- Sample
temperature: <85° C
|
|
sMS1204Flow |
|
Flow sensor
is suitable for stable continuous flow of pipe or tub
transportation system. Might be better in statistic measurement. |
|
sMS1204Tub |
|
This
sensor is designed for huge match, violent continual flow.
There is a mechanic balance to sample well. and could attach
automatic device to balance the sample if needed. |
|
sMS1204Moon |
|
Moon
sensor is designed for small continual unstable flow. |
|
sMS1204CC |
|
CC is
used for plate conveyor. such as paper, wood plate etc. |
|
sMS1204Dp |
|
Dp is
disc like, facing the incoming flow while measuring. Always used
in sands mixer and soft materials conveyor system, to measure the
moisture continuously. |
|
sMS1204Df |
|
Df is
the adapted type of Dp sensor, to be used in pot mixer, slide alike
fields, set with flange or thread. |
s-MST1511B
MWA Moisture Transducer
[Introduction] [Datasheet] [UserApplicationDataForm]
 |
Microwave
transmission attenuation method, with the sensor and radio source
being setup across the samples, no contact, to suit to measure
moisture of the mild big particles and powders on conveyor alike.
- Range:0-100%;
- Repeatability:+/-1.5%FS;
- Response time:
<100ms;
- Sample
temperature: <100° C
|
MS4810DRAP/4820DRAS NIR Moisture Analyzer
[Introduction] [Datasheet] [UserApplicationDataForm]
 |
NIR
optic dispersing method to monitor the moisture mainly of surface
layer of the samples, which might be on conveyor whereas. Typical
used for loose state materials, such as tobacco, foliage food
materials, paper web etc. on line moisture monitoring .
- Range:0.01-100%;
- Repeatability
accuracy:+/-0.02%;
Response
time: <100ms
|
MS6450
Neutron Moisture Monitor
[Introduction]
[Datasheet] [UserApplicationDataForm]
 |
Neutron
reaction method. Used for special fields where other moisture
technology is not easy to be used, such as sealed container,
corrosive or caustic liquid pot, high temperature and or explosive
field.
- Range:0.5-50%;
- Repeatability
accuracy:+/-2%FS;
- Response
time:<100ms.
|
 |
