BD5-series STIM
Transducer Technology
BD5
Measuring System Configuration
Ref:BD5sys_Cfg_E
Part1
Part2
System Design
Economic Remote Monitoring System Configuration
T-BD5xMx Transducer ========è
XM3.5/XM4.5 Digitalizer
Deluxe Remote Monitoring System Configuration
T-BD5xMx Transducer <========> p-BD4CCD Controller
Note: One p-BD4CCD Controller can connect upto 247 STIM by
RS485.
Computer Acquisition Configuration
T-BD5xMx Transducer <========> Computer Acquisition
Device Information
Digitalizer(remote meter)
|
Products |
Model |
Introduction |
|
|
|
LED
Display |
XM3.5 |
Analog
10 bits. 1 to 1, Power supply DC24V or AC110/220 |
|
|
|
LED
Display |
XM4.5 |
Analog
12 bits. 1 to 1, Power supply DC24V or AC110/220 |
|
|
* Power source is DC 24V, or 220V AC
Monitor and network controller
|
Products |
Model |
Introduction |
|
|
|
monitor |
p-BD4CCD-MB |
Modbus-32. 32 STIM accessible |
|
|
|
Instrument
Net Station |
INS2000-MB256 |
320*280
LCD, 247 STIM accessible |
|
|
|
Instrument
Net Station |
INS2000-Ethernet |
320*280
LCD, 247 STIM accessible.10BaseT, Intermet/ Intranet. Internet Navigator |
|
|
l
AC-DC supplier included, you must state your local AC source, or set it in the power
supply
Computer Software
|
Computer
Acquisition |
Win98.1-MB |
RS485,
STIM/Modbus communication, IEEE1451.1 NCAP |
|
|
|
Computer
Control |
Win98.2-MB |
RS485,
STIM/Modbus communication, IEEE1451.1 NCAP |
|
|
Power Supply
|
|
Model |
Specification |
|
|
|
DC
Source |
PS220-15-1.5 |
+15V;
10W |
|
|
|
|
PS220-15-16 |
+15V;
4.5W |
|
|
|
|
PS220-15-30 |
+15V;
4.5W |
|
|
|
|
PS220±15-0.5 |
±15V; 3W |
|
|
l
if 110 AC 50/60Hz
local power, please specify PS110.
D/A Isolator
|
|
Signal |
|
|
|
|
ADIsolator |
4-20mA |
AD202/204 |
|
|
|
DAIsolator |
4-20mA |
|
|
|
★ n=1~2
Other Accessory
|
|
Model
|
Introduction |
|
|
|
Micro
printer |
UP-AF40 |
1.3m
wire and seats included |
|
|
|
wire |
5pin |
Normal
plastic |
|
|
|
wire |
5pin |
-40-80℃/ FM100 |
|
|
|
wire |
3pin |
-40-80℃/FM100，anti explosive |
|
|
|
R232/485 |
|
|
|
|
.
Technical Datasheet for BD4/5 STIM and NCAP controller
1)
<Introduction to
BD4&5 Transducer and Controller> http://www.BD-research.com/Products/Meters/BD4&5IntE.htm
2)
<Application System Configuration
Guide> http://www.BD-research.com/Products/Meters/BD5sys_Cfg_E.htm
3)
<Application Connection
of BD5 and BD4> http://www.BD-research.com/Products/Meters/BD4&5_CON_E.htm
4)
<Selection of BD5 and BD4>
http://www.BD-research.com/Products/Meters/BD4&5_Sel_E.htm
5)
< BD5 Application Note> http://www.BD-research.com/Products/Meters/BD5_AN01_E.htm
6)
<BD4 Application Note>
http://www.BD-research.com/Products/Meters/BD4_AN01_E.htm
7)
<Instrumental
network and communication> http://www.BD-research.com/NetWork/
8)
<Introduction to IEEE
1451.1 NCAP 1451.2 STIM >
9)
<STIMcom protocol>
10)
<SCom protocol>
11)
<Modbus protocol>