Electronic
Connection for BD5 STIM and BD4 Controller
General wiring
color for BD5 STIM(only for reference)
|
9-24V DC+ |
+DA1 |
+ALM |
RD+(485-A) |
RD-(485-B) |
电源供电GND |
Colors of wire 1# |
Red |
Yellow |
Green |
Blue |
Black |
White |
Colors of wire 2# |
Red |
Light red |
Yellow |
Light green |
Green |
White |
※
Suggested to check the connection by test for user system
BD4xCD monitor
p-1651(pBD4Controller)
Connector on rear plate
|
Supply +15V |
PWR
GND |
|
RS485 |
RS485 |
|
Analog Conn |
Analog
GND |
|
|
+15V ¥ |
¥GND |
|
485TD+¥ |
¥Y |
|
AD1¥ |
¥AGND |
|
‚ |
+15V ¥ |
¥ GND |
|
485TD-¥ |
¥Z |
|
AD2¥ |
¥ AGND |
|
ƒ |
+15V ¥ |
¥ GND |
|
485RD+¥ |
¥A |
|
AD3¥ |
¥ AGND |
|
„ |
+15V ¥ |
¥ GND |
|
485RD-¥ |
¥B |
|
AD4¥ |
¥ AGND |
|
… |
+15V ¥ |
¥ GND |
|
¥ |
¥ |
|
AD5¥ |
¥ AGND |
|
† |
+15V ¥ |
¥ GND |
|
485TD+¥ |
¥Y |
|
AD6¥ |
¥ AGND |
|
‡ |
+15V ¥ |
¥ GND |
|
485TD-¥ |
¥Z |
|
AD7¥ |
¥ AGND |
|
ˆ |
+15V ¥ |
¥ GND |
|
485RD+¥ |
¥A |
|
AD8¥ |
¥ AGND |
|
‰ |
¥ |
¥ |
|
485RD-¥ |
¥B |
|
¥ |
¥ |
|
JDB9 RS232 JDB26 JW2: SiliconeContact ISOs(red) ISOr (yellow/white)
=
=
=upto 256 STIM
1) <Introduction to BD4&5 Transducer and Controller> http://www.BD-research.com/Products/Meters/BD4&5IntE.htm
2) <Application System Configuration Guide> http://www.BD-research.com/Products/Meters/BD5sys_Cfg_E.htm
3) <Application Connection of BD5 and BD4> http://www.BD-research.com/Products/Meters/BD4&5_CON_E.htm
4) <Selection of BD5 and BD4> http://www.BD-research.com/Products/Meters/BD4&5_Sel_E.htm
5)
< BD5 Application Note> http://www.BD-research.com/Products/Meters/BD5_AN01_E.htm
6)
<BD4 Application Note> http://www.BD-research.com/Products/Meters/BD4_AN01_E.htm
7)
<Instrumental network and communication> http://www.BD-research.com/NetWork/
8)
<Introduction to IEEE 1451.1 NCAP
1451.2 STIM >
9)
<STIMcom protocol>
10) <SCom protocol>
11) <Modbus protocol>
Call: 010-8264.9388 Fax: 010-6254.1653
P.o.Box: 603 BDTI
Beijing,China 100190
Address: NanSanJie, ZhongGuanCun, Haidian