SCT1100
series
Ref: SCTIntE
___IEEE1451.2 STIM
Compatible, 1451.1 NCAP Network support. Analog and Digital Signals
Output. Remote Setup and Operate.
n
Continuous
analysis. Direct measurement in sample
n
Accurate and
reliable, low-maintenance
n
Self
diagnostic, professional intelligent, Menu-driven digital user interface
n
Auto
diagnostic and alarm, optional purge or flush and bubble sucker accessories
n
Easy
maintenance __ on time clear or replace of sensor in sito
n
Data log of
measurements for day/month/year
n
One-year
warranty
n
Industrial
Process Water
n
Boiler/Cooling Water Flow Application
n
Ultrapure
Water Application
n
Wastewater Treatment Application
n
Drinking Water Treatment
n
Boiler/Cooling Generation Flow Application
n
Agriculture and Aquaculture Water
n
Auto
temperature compensation.
n
User calibration at field to get high accuracy application
n
One sample or on-line sample correction function available
n
Experiences low power design, maybe drived by battery or solar
battery in remote area.
n
Unit convert function included. Specified temperature standard
SCT can be calculated via experienced relations, or user define with BD5xMD
upper system
Linear
analog signal output, 0/4 to 20 mA select. dedault status is 0 to 20 mA
RS232
serial port always available, RS485 attached as to BD5xB upper configuration.
Power
supply: DC 9 to 24 V; comsumption<100mAx5V
Intrinsic
safe design
Alarm
drive output available
ADC
resolution: 16bit
For
more details, please refer to : BD4&5IntE
|
|
|
|
|||
Model |
SCT1121-2 |
SCT1122-2 |
SCT1122-5 |
SCT1124A |
SCT1124B |
SCT1131 |
Cell constant |
K=0.01/0.1/cm |
K=0.01/0.1/cm |
K=1/cm |
K=10/cm |
K=3/cm |
TDS |
Range |
0.04-200ms/cm |
0.04-200ms/cm |
50-500ms/cm |
0.01-1000ms/cm |
0.2-1000us/cm 0-2000ms/cm |
0-30%TDS |
Accuracy |
±1.5%R or+/- 0.05%FS |
±1.5%R or +/- 0.05%FS |
±1.5%R or+/- 0.05%FS |
±1.5%R or +/- 0.05%FS |
±1.5%R or+/- 0.05%FS |
±0.5-1.5%FS |
Temperature |
0-60℃ 0-120℃ |
0-60℃ 0-120℃ |
0-60℃ 0-120℃ |
0-60℃ 0-175℃ |
0-60℃ 0-175℃ |
0-120℃ 0-200℃ |
Pressure |
7 kgf/cm2. <16 kgf/cm2 |
7 kgf/cm2. <16 kgf/cm2 |
7 kgf/cm2. <16 kgf/cm2. |
<16 kgf/cm2. |
<16 kgf/cm2. |
<16 kgf/cm2. |
CPA |
CPA1-3 |
CPA1-3 |
CPA1-3 |
CPA1-3 |
CPA1-3 |
CPA1 |
Connect |
ZG1”(NPT) |
ZG1”(NPT) |
ZG1”(NPT) |
ZG11/2”(NPT) |
ZG3/4” (NPT) |
ZG1” (NPT) |
Electronics |
BDx5M/B |
BDx5M/B |
BDx5M/B |
BDx5M/B |
BDx5M/B |
BDx5M/B |
Principle |
Single pole |
2 pole |
2 pole |
4 pole |
4 pole |
HF SCT |
Application |
Pure, ultra pure water |
Pure, ultra pure water |
common |
Drinking and natural resource water |
Waste water |
High dissolved solid water |
n
Installation & Accessories
CPA1
Insertion |
CPA2
for dip |
CPA3
for sink |
CPA4
flow throw |
CPA-HT2 high temperature |
|
|
|
|
|
BIG DIPPER TECHNOCHEM INSTITUTE
Call: (86) 10-8264.0226; 8264.0225; Fax: 86-10-8264.0221;
P.o.Box: 603 BDTI
Beijing, China 100190
http://www.BD-research.com/(English
version)
Business Department of Chemical Analyzer
email: support@big-dipper.us; sales@big-dipper.us;
Department of Application System Engineering
Water DO3230 Dissolved
Oxygen Transducer,TMP36 Temperature Transducer,SCT1121 Conductivity Transducer,
SCT1122 Conductivity Transducer, Salinity Transducer, SCT1130 Conductivity
Transducer, Mud1204 Concentration Transducer, Turb4210D Turbidity Transducer,
Turb4210DU Turbidity Transducer, Turb4210DTU Turbidity Transducer, MLSS4210D
Turbidity Transducer, pH Transducer, ORP Transducer, ISE Transducer, Dissolved
Gas Transducer;