moisture content, Moisture content Test, Moisture content detect, Moisture content measure, Moisture content measurement, Moisture content analysis, content monitor, Moisture content gauge, Moisture content cut, Moisture content Meter, Moisture content instrument, Moisture content  analyzer, Moisture content Moisture content transducer, Moisture content transmitter, Moisture content alarm, Moisture content detector, Water activity, Water activity Test, Water activity detect, Water activity measure, Water activity measurement, Water activity analysis, Water activity analyser, Water activity analyze, Water activity monitor, Water activity gauge, Water activity cut, Water activity Meter, Water activity instrument, Water activity analyzer, nWater activity transducer, Water activity transmitter, Water activity alarm, Water activity detector, Water percentage, Water percentage Test, Water percentage detect, Water percentage measure, Water percentage measurement, Water percentage analysis, Water percentage analyser, Water percentage analyzer, Water percentage monitor, Water percentage gauge, Water percentage cut, Water percentage Meter, Water percentage instrument, Water percentage analyzer, Water percentage transducer, Water percentage transmitter, Water percentage alarm, Water percentage detector,

Application Guide for Moisture Analysis of Solids and Powder Materials

sMS2100 Moisture&water activity Transducer   [Introduction]  [Datasheet]   [User Applications Data Form] On-line Applications Process moisture measurement for solid powder, block materials  Specially designed for moisture measurement of irregular shaped materials, such as tobacco, foliage, cotton, and any mixture of powder, granular, grain state of particles. Drying, desiccation, evaporation, torrefaction, xeransis process monitoring Chemical process measurement  Industrial controls Specifications Aw Range: 0.015-1.000 Moisture Range:100ppm to 100% Accuracy: 0.015Aw (<+/-0.3°C, at room temperature ) Repeatability:< 0.003 Aw (<0.1°C, at room temperature) Response:<10s Temperature: -20 to 85°C; -50 to 200°C Instrument environ: -10 to 60°C； 0-99%RH 　 sMS1204 series Powder Moisture Transducer        [Introduction] [Datasheet] [User Applications Data Form] On-line Moisture Transducer T00-BD5xMD+sMS1204Dp RF attenuation. Range:0.1-50%; Repeatability:<+/-0.1%; Response time:<100ms; Sample temperature: <85° C 　 On-line Moisture Transducer T00-BD5xMD+sMS1204Moon RF attenuation. Range:0.01-30%; Repeatability:<+/-0.01%; Response time:<100ms; Sample temperature: <85° C sMS1204Flow 　 Flow sensor is suitable for stable continuous flow of pipe or tub transportation system. Might be better in statistic measurement. sMS1204Tub 　 This sensor is designed for  huge match, violent continual flow. There is a mechanic balance to sample well. and could attach automatic device to balance the sample if needed. sMS1204Moon 　 Moon sensor is designed for small continual unstable flow. sMS1204CC 　 CC is used for plate conveyor. such as paper, wood plate etc. sMS1204Dp 　 Dp is disc like, facing the incoming flow while measuring. Always used in sands mixer and soft materials conveyor system, to measure the moisture continuously. sMS1204Df 　 Df is the adapted type of Dp sensor, to be used in pot mixer, slide alike fields, set with flange or thread. s-MST1511B MWA Moisture Transducer    [Introduction] [Datasheet] [UserApplicationDataForm] Microwave transmission attenuation method, with the sensor and radio source being setup across the samples, no contact, to suit to measure moisture of the mild big particles and powders on conveyor alike. Range:0-100%; Repeatability:+/-1.5%FS; Response time: <100ms; Sample temperature: <100° C MS4810DRAP/4820DRAS NIR Moisture Analyzer    [Introduction] [Datasheet] [UserApplicationDataForm] NIR optic dispersing method to monitor the moisture mainly of surface layer of the samples, which might be on conveyor whereas. Typical used for loose state materials, such as tobacco, foliage food materials, paper web etc. on line moisture monitoring . Range:0.01-100%; Repeatability accuracy:+/-0.02%; Response time: <100ms 　 MS6450 Neutron Moisture Monitor    [Introduction] [Datasheet] [UserApplicationDataForm] 　 Neutron reaction method. Used for special fields where other moisture technology is not easy to be used, such as sealed container, corrosive or caustic liquid pot, high temperature and or explosive field. Range:0.5-50%; Repeatability accuracy:+/-2%FS; Response time:<100ms.

Humidity, Humidity Test, detect, Humidity measure, Humidity measurement, Humidity analysis, Humidity analyse, Humidity analyze, Humidity monitor, Humidity gauge, Humidity cut, Humidity Meter, Humidity instrument, Humidity analyzer, Humidity transducer, Humidity transmitter, Humidity alarm, Humidity detector, Dew point, Dew point Test, Dew point detect, Dew point measure, Dew point measurement, Dew point analysis, Dew point analyse, Dew point analyze, Dew point monitor, Dew point gauge, Dew point cut, Dew point Meter, Dew point instrument, Dew point analyzer, Dew point transducer, Dew point transmitter, Dew point alarm, Dew point detector,

Application Guide for Moisture Analysis of Gases

　

T-BD5 gMS2100  Gas Moisture Transducer      [Introduction] [Datasheet] [User Application Datasheet]

Relative humidity/ Absolute Humidity / Dew Point / Moisture Feature : Humidity sensor rectified by temperature and pressure technology. Absolute humidity/Dew point measurement Ambient to ppb moisture range.Range：~ppb-1000ppm； Accuracy:+/-5%R Measurement range is from ambient to ppb moisture concentrations in a wide variety of gases. Features include a 16-character, backlit LCD with front panel keypad, isolated current or voltage output, data and fault alarm relays, and computer-enhanced response. AT2123 Thin film polymer sensor Sample temperature: 0-70℃,ATC Pressure Compensation:0-1.0MPa. AT2110 Aluminum-Oxide Moisture Sensor Sample temperature:0-300℃。ATC Pressure Compensation:0-1.0MPa.