Moisture Test at Your
Will
These new moisture meters combine
simplicity with advanced meter functions to provide you with fast, accurate
results. Available in variety of sensor types to compliment different applications, as to
liquids, slurries and powders in different physiochemical status.
Practical Design with Powerful Functions
HMS1204
moisture teller measures the
temperature of sample from -20-100℃.
Automatically temperature compensation by software calibration chart. With the
multiple calibration charts function at the same ADC hardware channel with one
sensor, it can suit to measure 8 kinds of substances exactly ____only by one
key selection of charts in use. User calibration could make the test more
accurate, ignoring the discrepancy by sample composition and conditions at most
cases.
The new powerful BD5 analyzer will
supply you with modern instrument function, such as huge data log and communication
support.
Proved Technology
MS
1204 moisture sensor is based on microwave
transmission attenuation monitor. The essential test signal is directly
proportional to water content.
Employing of this experienced
technology reduces the influence of sample composition and TDS of water
contained to a great extent, for that these two elements always seriously
trouble other electronic moisture sensors, as well keep high sensitivity
compared to electric capacity principle.
Independent from sample contamination,
so assured wide adaptation and stable repeatability over any industry
applications.
User sample calibration algebra makes
test results more reliable and identical to any Standard Analysis Method.
Expanding Application
Actually, MS1204 is also a good concentration
sensors for many kinds of mixture.
The expanding application is as easy as the normal operation. This is
wonderful for research laboratory and new products developing center.
Specifications of Analyzer:
|
Sensor Type
|
Microwave loss
|
|
Range
|
100ppm－100％
|
|
Repeatability
|
±0.1-0.5％FS
|
|
Response time
|
< 100 ms
|
|
Sample temperature
|
-20－100
°C
|
|
Circumstance
|
< 75% RH
|
|
Circumstance
|
-10－75℃(Special by order)
|
|
Safety
|
Intrinsic
|
|
Power
|
DC 9V /9V Ni-Gd > 4 hours
|
|
Meter Size
|
98W×180H×35T (mm）
|
|
Sensor Size
|
Dia 24×300 （mm,
N）
|
* HBD3 analyzer has 1024 bit resolution,
so the main application range must be specified in order. HBD5 covers 0.01 to 100%
without range selection.
Liquid
and Slurries Moisture Applications:
l
100ppm low
detect limit moisture sensor MSL1204
is just good to check insulation oil, transformer oil and lubricants in plant
mechenic and electricity devices. And also smart way to test organic chemicals
in situ test, when importing materials, business deliver and exchange,
wherever.
l
Normal MS1204 sensor covers 0.1 to 100% of water
content. Widely used in many industries process and material’s check,
business transfer, and other in situ quick test fields. Such as in oil field,
refinery plant, fuel business, oil fuel tank and pot. It is very good to
monitor all kinds of organic’s and some inorgani materials too. Chemicals
factory, food industry, pharmacy plant, wherever needed, and whatever liquids
you meet.
l
MS1204PotScan and PotGauger are designed to gauge the moisture and quality of pot
storage materials, typical application is the crude oil field. PotScan can
gauge moisture and volume. PotGauger is enhaced with densimeter, so can
calculate weight quatity. Generally measures temperature, depth, density, and
moisture with one assembly sensor.
Powder
Moisture Applications:
l
Rice, millet,
broomcorn millet, wheat, beans, coffee, fruits,
vegetable, food, fish meal, leather
l
Sands/coal/ore
,and other powder / chemicals etc. Woods, paper, fabric, wool, cotton etc.
l
Oil, beverage, juice, wine, beer and other
liquid, etc.
l
Organic /
inorganic chemicals, Polymers,
etc.
Specifications of Liquid Moisture Sensors
|
Type
|
Applications
|
Range
|
Accuracy
|
Sample Temp.
|
|
H-MS1204N10
|
Lab and in situ sample test for
liquids
|
0.01-10%
|
± 0.01%
|
0-70℃
|
|
H-MS1204N
|
Lab and in situ sample test for
liquids
|
0.1-100%
|
± 0.1%
|
0-100℃
|
|
H-MS1204Bar
|
Specially for Car tank
|
0.1-100%
|
± 0.1%
|
0-100℃
|
|
H-MS1204Dip
|
for train tank. Depth < 3 m
|
0.1-100%
|
± 0.1%
|
0-100℃
|
|
H-MS1204Dipext
|
for pot and oil tank, depth> 3 m
|
0.1-100%
|
± 0.1%
|
0-100℃
|
|
H-MS1204PotScan
|
for pot gauge of moisture and volume.
|
0.1-100%
0-30m
|
± 0.1%
|
0-100℃
|
|
H-MS1204PotGauger
|
for pot gauge of moisture and weight,
with density compensation.
|
0.1-100%
0-30m
|
± 0.1%
|
0-100℃
|
Specifications of Powder Moisture Sensors
|
Type
|
Application Samples
|
Range
|
Accuracy
|
Sample Temp.
|
|
H-MS1204pawl
|
The most universal sensor.
Suitable for Max dia. <6mm.
Powder, grain, particle, colloid, thick fluid, truss, lump, block, chunk,
etc.
|
0.1-100%
|
± 1.0%FS
|
0-100℃
|
|
H-MS1204poke
|
Special for big particles, stack,
slurry samples.
and standing way to test to depth of
1m, with it’s 1.3m bar;
|
0.1-100%
|
± 1.0%FS
|
0-100℃
|
|
H-MS1204Spoon
|
Special for very fine powder sample.
Better to quantitative sample with
the spoon sensor
|
0.1-70%
|
± 1.0%FS
|
0-100℃
|
|
H-MS1204F
|
Special for plate materials, such as
wood, and plastic/complex materials
|
0.1-70%
|
± 0.5%FS
|
0-100℃
|
l
the
repeatability accuracy of powder moisture test is diverse because of sampling density
variety. The accuracy listed is the largest discrepancy at most cases. In case
of regular particle size distribution and uniform samples, accuracy of 0.1% is expected by experienced
operator.
Meter and Included
Accessories
|
Items
|
Model
|
Available Type
|
Remarks
|
|
Analyzer
|
H-BD5
|
C
|
included
|
|
Moisture sensor
|
H-MSxxxx
|
By order
|
included
|
|
Ni-Cd Battery
|
|
|
included
|
|
Packing Case
|
|
|
Included
|
|
Charger
|
|
|
Specify the user local power
standard, 110 V or 220V AC
|
Selective Accessories
|
Items
|
Model
|
Type
|
Remarks
|
|
Micro-Printer
|
TPUP
|
T40
|
Dot printer, general record paper support
|
|
Record paper
|
|
|
Consumable for printer
|
|
DC Power
|
|
|
for printer
|
|
PC Software
|
Acquisition
|
|
|
|
RS485 Kit
|
|
|
Remote connect to PC
|
|
Clamp Fit
|
ST1 Fitter
|
NPT1”
|
Screw Fixing Clamp
For temporary on-line pipe continuous test usage
|
|
Bottle Fit
|
B25 Fitter
|
Dia.25
|
Screw Fixing Clamp
For temporary on-line pipe continuous test usage
|
Series
Technology Products
|
Items
|
Model
|
Range
|
Applications
|
|
Moisture
Water Activity
|
H-MS1130
|
ppm - %
|
FC, low moisture test, suitable for
samples with low dielectric constant
|
|
Moisture
Water Activity
|
H-MS1204
|
0.1-100%
0.01-1.00 Aw
|
FD, better moisture accuracy over
wide range
|
|
Moisture
Water Activity
|
H-MS1219
|
0.05-100%
0.01-1.00 Aw
|
TDR, better moisture accuracy at high
water content
|
|
Moisture
Water Activity
|
H-MS2123
|
ppb-570ppm
0.01-1.00 Aw
|
EC,trace moisture test
|
Ordering
Information
…………………………………………………………………………………
User
Application Data Form
|
Samples
|
Name
|
Moisture range
|
|
Other information
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Return to
Moisture
homepage
H-MS1204 series
